There’s no universal puff count — it depends on the device’s distillate capacity, its coil, and (the big one) your draw length. Here are the working ranges for our line, and how to get the most out of each device:
By Device (The Ranges)
| Device | Distillate | Typical pulls | Notes |
|---|---|---|---|
| Mad Mind 2.2g | 2.2g | ~100–200 | The compact; a few weeks of moderate use |
| Stoner Blend 3.8g | 3.8g | ~200–350 | The mid-size; ~2 months moderate use |
| Liquid Diamond 3g | 3g | ~180–320 | The higher-viscosity draw (the liquid diamond character) |
| Stoner Blend 9g | 9g | ~400–700 |
What a “Pull” Actually Is (The Standard That Makes the Counts Comparable)
The counts above assume a standard pull: ~2 seconds, a comfortable draw, 30-second rest between pulls — the vape dosing guide‘s technique. A 5-second continuous draw uses 2–3× the distillate per pull (and hits harsher, because the coil runs hot); a 1-second tap uses less but delivers less per pull, so the “pull count” inflates while the actual distillate consumption stays roughly the same. The honest metric is distillate consumed, not pull count — the 2-second/30-second standard is just the common denominator that makes the device comparisons work.
How to Get the Full Count (The Technique That Stretches It)
- Short, spaced pulls — the 2s/30s standard. Chain-pulling (back-to-back draws) runs the coil hot, wastes distillate as unvaporized heat, and drains the battery faster — the maintenance guide covers the chain-pull problem specifically.
- Store cool and upright — the battery care rules; heat degrades both the battery and the distillate, and a degraded battery cuts the pull count short even with distillate left.
- Don’t chase the last “dry hit” — the end-of-device phase (the thin, hot, flavorless pulls) is where the distillate is running out and the coil is burning whatever’s left; it’s 10–20% of the device’s pulls and nearly none of its value. The device is done when the vapor thins, not when the battery dies.
The Dose Math (Pulls → Effect)
A “session” is 3–10 standard pulls (the dosing guide has the per-pull titration); a moderate user runs ~2–4 sessions a week on a mid-size device, which is where the “~2 months” figure comes from. The per-pull cannabinoid delivery varies by device (the atomization efficiency), so the per-piece COA and the labeled potency are the reference, not a universal mg-per-pull — the lab reports page has the per-batch numbers. Device specs: the lineup page.